My Humax Forum » Freeview HD » FVP 4000T, 5000T

Poor picture on live TV

(4 posts)
  1. User has not uploaded an avatar

    ffaffer

    new member
    Joined: Feb '18
    Posts: 2

    offline

    I am confused by my 4000t. Yesterday, when I tried to view live TV there was only a very faint picture. Sound was OK. My initial thought was that the TV was at fault so I tried with another but got the same result.
    Recording and playback work fine. The aerial seem OK - live TV via the aerial rather than the 4000t is fine.
    I’ll be grateful for any suggestions as to the cause of this behaviour.

    | Thu 8 Feb 2018 11:50:25 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,598

    offline

    ffaffer - 24 minutes ago  » 
    I’ll be grateful for any suggestions as to the cause of this behaviour.

    I am not sure what you mean by live TV. Do you mean watching TV via the tuner of the TV rather than via the HDMI feed from the Humax? If so and the Humax is in standby, have you got the "Power saving in standby" setting set to off (which is necessary for aerial pass through to work)?

    | Thu 8 Feb 2018 12:18:29 #2 |
  3. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Hi welcome to our forum. Try pulling out the power adaptor for 5 mins. Reconnect the power and wait for the box to boot and restart the clock and shut down. Now try booting the box.

    | Thu 8 Feb 2018 12:19:15 #3 |
  4. User has not uploaded an avatar

    ffaffer

    new member
    Joined: Feb '18
    Posts: 2

    offline

    Thank you for the replies. Re-booting has done the trick.

    Many thanks.

    | Fri 9 Feb 2018 11:40:33 #4 |

RSS feed for this topic

Reply

You must log in to post.