Recording failures « My Humax Forum

My Humax Forum » Freesat HD » FOXSAT HDR

Recording failures

(75 posts)

grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

RobJF - 14 minutes ago »
I've setup to record The One Show at 7pm on both BBC1 HD and BBC1Scot HD. I'll edit in the result below.

Set Both - one off on Foxsat-HDR

| Thu 4 Oct 2018 17:58:34 #51 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline
grahamlthompson - 7 minutes ago »

RobJF - 14 minutes ago »
I've setup to record The One Show at 7pm on both BBC1 HD and BBC1Scot HD. I'll edit in the result below.

Set Both - one off on Foxsat-HDR

Both started recording
Attachments
1. Recordings.jpg (319.6 KB, 3 downloads) 6 years old
| Thu 4 Oct 2018 18:07:52 #52 |
RobJF

member
Joined: Apr '14
Posts: 43
offline

Not sure if you'll have seen my edit, both failed until I switched on.

I've now setup back-to-back on both channels, will see results after 8pm.

| Thu 4 Oct 2018 18:13:11 #53 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

RobJF - 2 minutes ago »
Not sure if you'll have seen my edit, both failed until I switched on.
I've now setup back-to-back on both channels, will see results after 8pm.

I didn't see your post till 6:55 so after setting both box was in prerecording sby. Both did however start while in sby and box remains in recording sby (clock displayed). It should go back to full sby after two recordings complete.

AFter this I will set Eat Well for less and Press On both channels. This should start from full sby as there's a full 30 mins before next due to start.

Edit - What Software Version is installed ?

| Thu 4 Oct 2018 18:21:13 #54 |
RobJF

member
Joined: Apr '14
Posts: 43
offline

I scheduled 7.30-8 and 8-9 both channels. But if recording fails again at 7.30 should I switch on to make it start, in order to test the back-to-back functionality? I can of course also do 9-10 to match you.

It's now 7:38, no recording, so I'll switch on then off again to get it going.

Done, now recording in standby.

| Thu 4 Oct 2018 18:32:24 #55 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline
Recordings Set -
Attachments
1. Recordings2.jpg (377.1 KB, 1 downloads) 6 years old
| Thu 4 Oct 2018 18:51:07 #56 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

RobJF - 19 minutes ago »
I scheduled 7.30-8 and 8-9 both channels. But if recording fails again at 7.30 should I switch on to make it start, in order to test the back-to-back functionality? I can of course also do 9-10 to match you.
It's now 7:38, no recording, so I'll switch on then off again to get it going.
Done, now recording in standby.

What software Version - something is wrong ?

| Thu 4 Oct 2018 18:52:02 #57 |
RobJF

member
Joined: Apr '14
Posts: 43
offline

Not sure why you ask, this is just same pattern as before, scheduled recording fails until I switch on, so I did that to get the back-to-back function tested. Can't quote version off-hand but sure it's the latest.

| Thu 4 Oct 2018 18:57:47 #58 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline
First two started from sby.
Attachments
1. Recordings3.jpg (391.3 KB, 1 downloads) 6 years old
| Thu 4 Oct 2018 19:04:23 #59 |
RobJF

member
Joined: Apr '14
Posts: 43
offline

At 20:04 in high power standby but not recording, which I guess stopped at the end of the relevant programmes.

| Thu 4 Oct 2018 19:05:04 #60 |