My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Software Update June 15th 2015

(399 posts)
  1. User has not uploaded an avatar

    tbkbt

    junior member
    Joined: Jun '15
    Posts: 7

    offline

    I've been having the same resetting issues. ive factory reset the box but it now wont pick up any signal!?
    we have problems during summer here due to trees growing and in heavy wind the signal cuts out but i could watch it fine before i factory reset. can i force it through the setup somehow?

    | Thu 18 Jun 2015 16:51:41 #61 |
  2. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    tbkbt - 1 minute ago  » 
    I've been having the same resetting issues. ive factory reset the box but it now wont pick up any signal!?
    we have problems during summer here due to trees growing and in heavy wind the signal cuts out but i could watch it fine before i factory reset. can i force it through the setup somehow?

    Your signal to the current frequency of the freesat transponder is poor (due to move shortly). Do you have a friends to you set the unit up at?

    | Thu 18 Jun 2015 16:54:21 #62 |
  3. User has not uploaded an avatar

    tbkbt

    junior member
    Joined: Jun '15
    Posts: 7

    offline

    REPASSAC - 6 minutes ago  » 

    tbkbt - 1 minute ago  » 
    I've been having the same resetting issues. ive factory reset the box but it now wont pick up any signal!?
    we have problems during summer here due to trees growing and in heavy wind the signal cuts out but i could watch it fine before i factory reset. can i force it through the setup somehow?

    Your signal to the current frequency of the freesat transponder is poor (due to move shortly). Do you have a friends to you set the unit up at?

    possibly, my neighbours have sattelite dishes though OAP so not sure if theyre functioning. will give this a try

    | Thu 18 Jun 2015 17:01:21 #63 |
  4. User has not uploaded an avatar

    groovyoldwoman

    member
    Joined: Jul '13
    Posts: 19

    offline

    I've never bought anything that the manufacturer is able to muck up at will before, so glad I'm on this forum otherwise I would have been taking it back to the shop!

    I have done a factory reset, as last night's recordings were only part recorded. However this hasn't restored the icons that used to appear on the front of the box above the channel information.

    Is there any way of opting out of such 'updates'? Not all of us are tech savvy and find these things easy to fix when they go wrong. Sorry to sound grumpy but I'm sure you understand my frustration. And this forum is great by the way - keep up the good work!

    Rant over..

    | Thu 18 Jun 2015 17:15:24 #64 |
  5. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Though not experiencing the shut down/reboots. My HDR1000S icons are also missing. TBH until someone mentioned they were missing I hadn't noticed. They are so small and dim you can only see them very close to the box.

    | Thu 18 Jun 2015 17:18:41 #65 |
  6. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    grahamlthompson - 19 minutes ago  » 
    Though not experiencing the shut down/reboots. My HDR1000S icons are also missing. TBH until someone mentioned they were missing I hadn't noticed. They are so small and dim you can only see them very close to the box.

    +1

    | Thu 18 Jun 2015 17:37:53 #66 |
  7. User has not uploaded an avatar

    Trev_b

    member
    Joined: Jun '15
    Posts: 10

    offline

    For me a factory reset is the very last thing I would want to as the Humax is setup as I like it and many programs are set to record. Anyhow I powered the box down at the socket for ten seconds last evening and it appears to be stable since then.

    My icons are also missing from the front dusplay, however that's no big problem as I never look at them

    | Thu 18 Jun 2015 18:00:42 #67 |
  8. User has not uploaded an avatar

    David500

    member
    Joined: Jul '12
    Posts: 17

    offline

    I'm having problems with Edimax EW-7711USN wifi dongle (Ralink 3070 chipset) not being recognised working up to the software update on the 15th June. Working since bought June 2013.
    Tested on Windows 7 laptop, with on board wifi disabled, OK.

    | Thu 18 Jun 2015 18:01:30 #68 |
  9. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    David500 - also icons missing on unit front display?

    | Thu 18 Jun 2015 18:18:54 #69 |
  10. User has not uploaded an avatar

    navi

    member
    Joined: Dec '12
    Posts: 21

    offline

    My HDR1000S icons are also missing since the new update was installed.

    | Thu 18 Jun 2015 18:47:59 #70 |

RSS feed for this topic

Reply »

You must log in to post.