My Humax Forum » Freeview HD » HDR FOX T2

Unable to format

(3 posts)
  1. User has not uploaded an avatar

    Ziggy54

    new member
    Joined: Sep '17
    Posts: 1

    offline

    A few weeks ago I switched on my device and was informed that I would have to format it. I did this although I would lose approx 350/400 GB of data. All was well for a few days but then the same thing happened. Device worked perfectly until about two in the morning then when I switched back on about nine the same message but this time the device did not format. Device is approx 3.1/2 yrs old and on FHTCP 1.03.12.

    Kevin

    | Mon 25 Sep 2017 9:42:36 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Guessing you need a new hard drive. Shame you didn't ask before formatting may have been able to rescue your recordings using the custom firmware available for this model.

    Even without the Custom Firmware a HDR-FOX-T2 has a FTP server. Using a PC with software like FileZilla you could have copied all your recordings to a PC for safe keeping.

    It's a very simple job to fit a new hard drive. After fitting I would install the CF, one of it's options is a Hard Disk check and repair capability.

    I fitted one of these into my HDR-1000S recently.

    https://www.amazon.co.uk/Seagate-ST2000VM003-Pipeline-3-5-Inch-Internal/dp/B008B0RQ1C/ref=sr_1_1?ie=UTF8&qid=1506333213&sr=8-1&keywords=SEagate+pipeline+2tB

    Welcome to our forum

    | Mon 25 Sep 2017 9:54:44 #2 |
  3. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,689

    offline

    Ziggy54 - 13 minutes ago  » 
    A few weeks ago I switched on my device and was informed that I would have to format it. I did this although I would lose approx 350/400 GB of data. All was well for a few days but then the same thing happened. Device worked perfectly until about two in the morning then when I switched back on about nine the same message but this time the device did not format. Device is approx 3.1/2 yrs old and on FHTCP 1.03.12.
    Kevin

    I would suggest using the custom formware to investigate and hopefully fix this problem see the FAQ https://myhumax.org/forum/topic/how-to-fix-hard-drive-and-file-system-problems In the worst case a new hard drive will be required which is not a difficult job.

    | Mon 25 Sep 2017 9:57:31 #3 |

RSS feed for this topic

Reply

You must log in to post.