My Humax Forum » Freeview HD » FVP 4000T, 5000T

4000 No Programme Information

(58 posts)
  1. User has not uploaded an avatar

    ericcrichton

    member
    Joined: Mar '20
    Posts: 24

    offline

    PS wolfbane website is rejected by some browsers.

    | Sat 28 Mar 2020 18:04:14 #11 |
  2. User has not uploaded an avatar

    ericcrichton

    member
    Joined: Mar '20
    Posts: 24

    offline

    reduced size

    Attachments

    1. wolfbane.jpg (39.6 KB, 16 downloads) 4 years old
    | Sat 28 Mar 2020 18:06:23 #12 |
  3. User has not uploaded an avatar

    ericcrichton

    member
    Joined: Mar '20
    Posts: 24

    offline

    wolfbane rejected by chrome, accepted by IE, Firefox and Opera
    Took screen from IE

    | Sat 28 Mar 2020 18:19:10 #13 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    I can't get at my 5000T at the moment as it's playing back a recording. When it completes I can go through the procedure if another poster doesn't chip in with the detailed instructions.

    DVB-T mux 50 59 58 49 and 55

    DVB-T2 mux 54

    I just used Chrome without issue as the image was too small to read the numbers.

    | Sat 28 Mar 2020 18:19:24 #14 |
  5. User has not uploaded an avatar

    ericcrichton

    member
    Joined: Mar '20
    Posts: 24

    offline

    I am on a 4000t not 5000t

    | Sat 28 Mar 2020 18:21:19 #15 |
  6. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    ericcrichton - 1 min ago  » 
    I am on a 4000t not 5000t

    The user interface is identical So much so it was found to load the 5000T update until Humax released a version for the 4000T

    | Sat 28 Mar 2020 18:23:03 #16 |
  7. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Screen grab using Chrome at full 1920 x 1080 pixels

    Guessing Moely-Y-Parc is creating the issue. It's a common issue for Winter Hill users.

    Only way to be sure is check reception using the MUX numbers for the alternate trransmitter. Do you have a a powered amplifier in the system (a hangover from the pre DSO days) ? If so removing it and connecting the in and out cables together will likely completely fix the problem and allow auto tune to work.

    Attachments

    1. WinterHill.jpg (510.1 KB, 11 downloads) 4 years old
    | Sat 28 Mar 2020 18:29:02 #17 |
  8. User has not uploaded an avatar

    ericcrichton

    member
    Joined: Mar '20
    Posts: 24

    offline

    I don't have an amplifier. Its a block of flats with shared antenna
    GrahamThomspn is going to provide details of how to set up the unit with
    DVB-T mux 50 59 58 49 and 55
    DVB-T2 mux 54

    | Sat 28 Mar 2020 21:33:32 #18 |
  9. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    I will address this on Sunday morning after clock change. After any overnight recordings have completed and photographing current schedule. I will have to re-instate current recording schedule.

    Like others myself and wife are in the at risk category (both over 70) . My 21 yr old grandson is a hospital porter at our local hospital and his 18yr old girlfriend lives in as well.

    I have images that would shame the NHS.

    Surprised that another member hasn't so far stepped up given the amount of info that we already have.

    We are enjoying a Netflix movie now.

    We are all so far healthy and have no symptoms.

    | Sat 28 Mar 2020 21:46:26 #19 |
  10. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,711

    offline

    ericcrichton - 2 hours ago  » 
    I don't have an amplifier. Its a block of flats with shared antenna
    GrahamThomspn is going to provide details of how to set up the unit with
    DVB-T mux 50 59 58 49 and 55
    DVB-T2 mux 54

    The manual tuning FAQ is at https://myhumax.org/forum/topic/manual-tuning-instructions-1 Start at step 3.

    | Sun 29 Mar 2020 0:08:20 #20 |

RSS feed for this topic

Reply »

You must log in to post.