My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

 

Remote control has stopped working - unit failing to respond.

(371 posts)
  1. User has not uploaded an avatar

    brig001

    new member
    Joined: Dec '11
    Posts: 4

    offline

    My mother-in-law had the original problem on this thread (9300T), but now it just switches itself off (presumably standby) after a couple of minutes. Could this be related?

    I don't own a Humax myself, so am a bit lost...
    Which firmware should she have?
    How do you tell which version is running?

    Thanks for any help,
    Brian.

    | Sat 24 Dec 2011 12:50:53 #211 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    Welcome to our Forum Brian

    The latest firmware for the 9300 is 1.00.26

    Can be checked via: Menu, System, Status.

    Not sure why it is switching off, cannot say I remember anyone else reporting the same before.

    | Sat 24 Dec 2011 13:29:46 #212 |
  3. User has not uploaded an avatar

    richberry

    new member
    Joined: Dec '11
    Posts: 3

    offline

    Hi,

    i've been having the same problems with the humax 9150 freezing. I've never been able to receive the OTA software updates (i get an error message if i try to do it mannually) so i think my system ID might be corrupt. I followed the steps posted (i bought the two cables and have used the flash thingy along with the hdf file from the hummax website which began doing the update but eventually i get the error message "error location 13950. wanted (06) got (0) halting". can someone please point me to the system ID "uncorruptor" link?
    Many thanks

    rich

    | Sat 24 Dec 2011 15:39:21 #213 |
  4. User has not uploaded an avatar

    richberry

    new member
    Joined: Dec '11
    Posts: 3

    offline

    ps. when i run the Flash9200 in debug mode it keeps flashing "wating for 6 response....." if that is of any help?

    | Sat 24 Dec 2011 15:42:37 #214 |
  5. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,685

    offline

    richberry - 1 hour ago  » 
    I followed the steps posted (i bought the two cables and have used the flash thingy along with the hdf file from the hummax website which began doing the update but eventually i get the error message "error location 13950. wanted (06) got (0) halting".

    The fact that the error location is reported as 13950 means two things:
    your System ID is correct
    the update procedure got a long way before failing.

    Was anything else running on the computer when you were trying to update? I suggest shutting down as many programs as you can on the computer and trying a few more times.

    | Sat 24 Dec 2011 16:48:05 #215 |
  6. User has not uploaded an avatar

    brig001

    new member
    Joined: Dec '11
    Posts: 4

    offline

    Barry - 3 hours ago  » 
    Welcome to our Forum Brian
    The latest firmware for the 9300 is 1.00.26

    Thanks Barry, 1.00.10
    I see auto update is on, but I don't think it ever has.
    So I suppose I need a serial lead or she will have to wait till the 27th.
    Brian.

    | Sat 24 Dec 2011 17:20:30 #216 |
  7. User has not uploaded an avatar

    brig001

    new member
    Joined: Dec '11
    Posts: 4

    offline

    Can't find a serial lead with the right plugs on - can't find any plugs either. Looks like she'll have to wait and I'll force a manual OTA update on the 27th.

    | Sat 24 Dec 2011 18:10:49 #217 |
  8. User has not uploaded an avatar

    crashhot

    new member
    Joined: Dec '11
    Posts: 1

    offline

    I tried posting something on the Facebook site, even tonight, Christmas night, they've got somebody up deleting it making sure nothing criticising humax appears… Not very helpful!

    Thanks for the instructions here, I guess I will have to wait for the 27th as well?

    | Sun 25 Dec 2011 21:34:55 #218 |
  9. User has not uploaded an avatar

    hughie

    junior member
    Joined: Dec '11
    Posts: 9

    offline

    all fyi.. for those who have the wrong sys id !!

    my
    - flash 9200 failed e-ut.
    - WDN4OAK+ won't run.

    i have correct cable and win 7-64.

    barry just sent me Systemid(3023_0000).hdf to install first using flash9200.

    both patches went in as smooth as a smooth thing (by PC/RS232c) and we are at v26. whey heyyyyyyyyyyy!

    cheers vm .. h

    (must have had wrong sysid for years)

    | Tue 27 Dec 2011 16:38:27 #219 |
  10. User has not uploaded an avatar

    richberry

    new member
    Joined: Dec '11
    Posts: 3

    offline

    Martin Liddle - 3 days ago  » 

    richberry - 1 hour ago  » 
    I followed the steps posted (i bought the two cables and have used the flash thingy along with the hdf file from the hummax website which began doing the update but eventually i get the error message "error location 13950. wanted (06) got (0) halting".

    The fact that the error location is reported as 13950 means two things:
    your System ID is correct
    the update procedure got a long way before failing.
    Was anything else running on the computer when you were trying to update? I suggest shutting down as many programs as you can on the computer and trying a few more times.

    Many thanks. i've just re-run the falsh thingy and now that the world and his wife aren't trying to buy stuff off the net it ran fine. my humax is now working fine and the fan no longer runs constantly. thanks. rich. great website!!!

    | Wed 28 Dec 2011 0:22:35 #220 |

RSS feed for this topic

Reply »

You must log in to post.