Tried to turn my box on last night, wouldn't even boot up. HDD would spin, then it would fall over and start from the beginning in a loop.
HDD's are a reliable form of storage, but Humax's implementation leaves a lot to be desired...
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
Hard drive issues
(622 posts)-
| Tue 8 Mar 2016 19:48:43 #181 |
-
A shot in the dark, but I had a similar problem just after buying my 1100s. The box crashed, and when it tried to boot up, the disk would try to spin up, and then reboot. Whilst checking all of the connectors on the back, I noticed that the power lead came out very easily. On replacing it, i pushed a bit harder, and there was a definite 'click' as it went home. Since then, I have had no problems (fingers crossed!)
| Wed 9 Mar 2016 15:42:58 #182 | -
As no one has replied to my posts on the mystery of the disappearing hard drive, I thought I'd have a trawl through the forum and see from this tread that I'm not alone.
Now to finding a replacement. One thing I can assure you of is that I won't be buying another Humax. Ever. Period. Not because the box is crap (and it clearly is) but because their customer service is clearly worse than their box.
| Sat 26 Mar 2016 17:32:49 #183 | -
My HDR1000S 1TB has just had this same issue appear 2 days ago. Annoyingly 10 days outside the extended warranty period. I purchased my box just over 2 years ago.
Seeing as so many boxed seem to have reported this issue in a short period of time, you would think that its potentially an issue with their software.
I'll keep an eye on this forum for a fix, hopefully something soon.
| Wed 30 Mar 2016 10:05:05 #184 | -
I have been following this (and other threads) today! My wife reported our HDR1010 (purchased Nov 2013) was showing "no recordings", "less that 1%" (instead of 62%). The planned recordings were still listed. We switched off at the mains for 10 minutes or more several times wth no change. Having ploughed through this very helpful topic, and noticing that, at one time I had paired with another device (probably the Samsung Galaxy that I lost in February), I decided to install the Freetime app on my current phone. I was immediately able to interact with the Humax and see the recordings list - though I understand this may have just been a copy uploaded to the cloud? This didn't last long: the list soon disappeared and the connection was lost. Also there were problems at the Humax end, which on the Network connection settings screen was telling me that it was connected to the internet (by ethernet), while the Freetime ID screen was saying it wasn't connected. This hung before it could get to the pairing code stage. I tackled this by disconnecting the Humax power, HDMI and ethernet connections (rather than just switching off at the mains). When I reconnected them after 10 minutes or so and switched on, the recordings list was there and we were able to watch recordings. We did notice that one planned recording had failed after a few minutes and a couple of subsequent planned recordings had not worked. We then noticed that the planned recordings list had been wiped. But we seem to have our recordings back. So far so good.
| Sat 2 Apr 2016 23:24:34 #185 | -
Smeb,
I'll give your advice ago and unpair my device with the app etc.
I have also notice that since I have lost all my recordings and the ability to recognise the HDD, all the channel names have reverted to text format instead of the channel logos. Also I'm now missing all the images for On Demand, it just shows a black box with the word 'image' for BBC iPlayer, On Demand etc. Finally when watching 4OD there seems to be an issue with the adverts as these don't play and it forces the programme back to the beginning.
I don't know if these extra problems are due to me returning to default settings or there is some software bug which is causing all this.
| Mon 4 Apr 2016 7:41:25 #186 | -
Welcome to our Forum
Reset to factory settings deletes the cache for channel icons, on demand images etc. Leave the unit on for an hour or so and they should download - can take a while.
| Mon 4 Apr 2016 8:18:53 #187 | -
Ah ok, well its been a couple of days now with frequent use and still missing the channel icons and on demand logos. Hopefully they will return soon.
Now just to figure out how to get my hard drive recognised again.
| Mon 4 Apr 2016 10:51:21 #188 | -
I suspect it's suffering from failed capacitors, similar to the one mentioned here:
| Mon 4 Apr 2016 14:26:24 #189 | -
andyfras - 9 minutes ago »
I suspect it's suffering from failed capacitors, similar to the one mentioned here:
https://myhumax.org/forum/topic/dtr-t10x0-successful-repairExternal PSU's used on the HDR 1***S units
Not sure what are used on main board.
| Mon 4 Apr 2016 14:37:57 #190 |
Reply »
You must log in to post.
