Humax Aura « My Humax Forum

My Humax Forum » Freeview HD » Aura UHD

Humax Aura

(892 posts)

grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

Jthspace - 27 mins ago »
Got my sound sorted (well almost). Dived behind the TV and pulled all the cables out of everything and started from scratch. The Humax remote main On/Off (programmed TV button for LG and Inputs) now switches the humax box, tv and panasonic sound box on and the volume level is consistent across all devices EXCEPT that volume up/down on the humax remote still does not change the volume on the Sound box. However, volume levels are consistent across the three devices so no sudden surprise if you switch away from the Humax. As I now also have a Firestick 4K I have retired my Apple TV.
Just loaded Disney+ from the app store and it works fine.
My system preferences show
Model - FVP-4KGTR
Application version -1.00_25_2-1029_0a7a47a
Firmware version - 00.09.09
System ID - A31d9F00
Update date - Oct 29,2020 11:06:43 am

Can you please check the application version that is definetely a 2-1029.

Should be no dash but 21029_ etc

eg Application version: 1.00_25_201029_0a7a47a

| Fri 13 Nov 2020 13:17:00 #265 |
larkim

special member
Joined: Nov '20
Posts: 300
offline

All a bit premature as we don't have the app available yet, but on reading through the manual my interpretation is this:-
- live broadcasts, whether HD or SD, will be watchable "live" via the app
- offline viewing of recordings will require a pre-mediated "convert" choice to put them into "mobile" format

What about watching "live" a recording made on the box via streaming it over wifi in the home? The EETV box that I'm migrating from allowed SD and HD recordings to be watched in the home without any conversion; I'm guessing it just pushed the transport stream across to the phone (worked from day 1 on Apple devices, had to wait a while before the app supported HD on android, but it does now).

If it's being "streamed" live from a recording then there should be no issues with encoding / copy protections for the HD streams; would be a pain if I needed to convert everything that I might want to watch on my phone whilst cooking etc. And would the conversion process result in a loss of quality when watching the programme back via the TV?

All stuff to play with over the next few weeks I suppose. This all takes me back to the heady days of the 3view box which I was an early adopter of. A brilliant box in many ways - apart from the fact that it crashed and lost support!!

| Fri 13 Nov 2020 13:44:05 #266 |
Jthspace

member
Joined: May '16
Posts: 30
offline

grahamlthompson - 34 mins ago »

Jthspace - 27 mins ago »
Got my sound sorted (well almost). Dived behind the TV and pulled all the cables out of everything and started from scratch. The Humax remote main On/Off (programmed TV button for LG and Inputs) now switches the humax box, tv and panasonic sound box on and the volume level is consistent across all devices EXCEPT that volume up/down on the humax remote still does not change the volume on the Sound box. However, volume levels are consistent across the three devices so no sudden surprise if you switch away from the Humax. As I now also have a Firestick 4K I have retired my Apple TV.
Just loaded Disney+ from the app store and it works fine.
My system preferences show
Model - FVP-4KGTR
Application version -1.00_25_2-1029_0a7a47a
Firmware version - 00.09.09
System ID - A31d9F00
Update date - Oct 29,2020 11:06:43 am

Can you please check the application version that is definetely a 2-1029.
Should be no dash but 21029_ etc
eg Application version: 1.00_25_201029_0a7a47a

Typo on ipad autocorrect. Should read 1.00_25_201029_0a7a47a

| Fri 13 Nov 2020 13:53:03 #267 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

Jthspace - 14 mins ago »

grahamlthompson - 34 mins ago »

Jthspace - 27 mins ago »
Got my sound sorted (well almost). Dived behind the TV and pulled all the cables out of everything and started from scratch. The Humax remote main On/Off (programmed TV button for LG and Inputs) now switches the humax box, tv and panasonic sound box on and the volume level is consistent across all devices EXCEPT that volume up/down on the humax remote still does not change the volume on the Sound box. However, volume levels are consistent across the three devices so no sudden surprise if you switch away from the Humax. As I now also have a Firestick 4K I have retired my Apple TV.
Just loaded Disney+ from the app store and it works fine.
My system preferences show
Model - FVP-4KGTR
Application version -1.00_25_2-1029_0a7a47a
Firmware version - 00.09.09
System ID - A31d9F00
Update date - Oct 29,2020 11:06:43 am

Can you please check the application version that is definetely a 2-1029.
Should be no dash but 21029_ etc
eg Application version: 1.00_25_201029_0a7a47a

Typo on ipad autocorrect. Should read 1.00_25_201029_0a7a47a

Same as mine. Baffled why I haven't got disney+ Wanting to test atmos passthrough.

| Fri 13 Nov 2020 14:08:13 #268 |
Mars

special member
Joined: Jan '16
Posts: 373
offline

grahamlthompson - 28 mins ago »

Jthspace - 14 mins ago »

grahamlthompson - 34 mins ago »

Jthspace - 27 mins ago »
Got my sound sorted (well almost). Dived behind the TV and pulled all the cables out of everything and started from scratch. The Humax remote main On/Off (programmed TV button for LG and Inputs) now switches the humax box, tv and panasonic sound box on and the volume level is consistent across all devices EXCEPT that volume up/down on the humax remote still does not change the volume on the Sound box. However, volume levels are consistent across the three devices so no sudden surprise if you switch away from the Humax. As I now also have a Firestick 4K I have retired my Apple TV.
Just loaded Disney+ from the app store and it works fine.
My system preferences show
Model - FVP-4KGTR
Application version -1.00_25_2-1029_0a7a47a
Firmware version - 00.09.09
System ID - A31d9F00
Update date - Oct 29,2020 11:06:43 am

Can you please check the application version that is definetely a 2-1029.
Should be no dash but 21029_ etc
eg Application version: 1.00_25_201029_0a7a47a

Typo on ipad autocorrect. Should read 1.00_25_201029_0a7a47a

Same as mine. Baffled why I haven't got disney+ Wanting to test atmos passthrough.

You must be unlucky as it is the most prominent app when I go to Google Play (Get More Apps)! Have you tried installing from the Google Play Website on a computer: https://play.google.com/store

| Fri 13 Nov 2020 14:39:13 #269 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

Mars - 10 mins ago »

grahamlthompson - 28 mins ago »

Jthspace - 14 mins ago »

grahamlthompson - 34 mins ago »

Jthspace - 27 mins ago »
Got my sound sorted (well almost). Dived behind the TV and pulled all the cables out of everything and started from scratch. The Humax remote main On/Off (programmed TV button for LG and Inputs) now switches the humax box, tv and panasonic sound box on and the volume level is consistent across all devices EXCEPT that volume up/down on the humax remote still does not change the volume on the Sound box. However, volume levels are consistent across the three devices so no sudden surprise if you switch away from the Humax. As I now also have a Firestick 4K I have retired my Apple TV.
Just loaded Disney+ from the app store and it works fine.
My system preferences show
Model - FVP-4KGTR
Application version -1.00_25_2-1029_0a7a47a
Firmware version - 00.09.09
System ID - A31d9F00
Update date - Oct 29,2020 11:06:43 am

Can you please check the application version that is definetely a 2-1029.
Should be no dash but 21029_ etc
eg Application version: 1.00_25_201029_0a7a47a

Typo on ipad autocorrect. Should read 1.00_25_201029_0a7a47a

Same as mine. Baffled why I haven't got disney+ Wanting to test atmos passthrough.

You must be unlucky as it is the most prominent app when I go to Google Play (Get More Apps)! Have you tried installing from the Google Play Website on a computer: https://play.google.com/store

I already have the app on my Windows 10 laptop. Afaik there is no web browser app for the aura.

| Fri 13 Nov 2020 14:50:32 #270 |
larkim

special member
Joined: Nov '20
Posts: 300
offline
Screen shot of compatibility from the play store for Disney+. Netflix shows an "x" and NowTV shows a tick (but doesn't actually work in practice).
Attachments
1. Disney.JPG (41.9 KB, 6 downloads) 4 years old
| Fri 13 Nov 2020 14:51:40 #271 |
larkim

special member
Joined: Nov '20
Posts: 300
offline

grahamlthompson - 2 mins ago »

Mars - 10 mins ago »

grahamlthompson - 28 mins ago »

Jthspace - 14 mins ago »

grahamlthompson - 34 mins ago »

Jthspace - 27 mins ago »
Got my sound sorted (well almost). Dived behind the TV and pulled all the cables out of everything and started from scratch. The Humax remote main On/Off (programmed TV button for LG and Inputs) now switches the humax box, tv and panasonic sound box on and the volume level is consistent across all devices EXCEPT that volume up/down on the humax remote still does not change the volume on the Sound box. However, volume levels are consistent across the three devices so no sudden surprise if you switch away from the Humax. As I now also have a Firestick 4K I have retired my Apple TV.
Just loaded Disney+ from the app store and it works fine.
My system preferences show
Model - FVP-4KGTR
Application version -1.00_25_2-1029_0a7a47a
Firmware version - 00.09.09
System ID - A31d9F00
Update date - Oct 29,2020 11:06:43 am

Can you please check the application version that is definetely a 2-1029.
Should be no dash but 21029_ etc
eg Application version: 1.00_25_201029_0a7a47a

Typo on ipad autocorrect. Should read 1.00_25_201029_0a7a47a

Same as mine. Baffled why I haven't got disney+ Wanting to test atmos passthrough.

You must be unlucky as it is the most prominent app when I go to Google Play (Get More Apps)! Have you tried installing from the Google Play Website on a computer: https://play.google.com/store

I already have the app on my Windows 10 laptop. Afaik there is no web browser app for the aura.

Puffin TV Browser is reported by the PlayStore as being compatible? Not tried it though.

| Fri 13 Nov 2020 14:53:59 #272 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

larkim - 2 mins ago »
Screen shot of compatibility from the play store for Disney+. Netflix shows an "x" and NowTV shows a tick (but doesn't actually work in practice).

I got similar. It just says installed which it is on the laptop that I opened the webpage on and the FVP box has an x

Doesn't help to get it on a Aura. The playstore app on my Aura Disney+ says version is incompatible.

| Fri 13 Nov 2020 14:56:12 #273 |
Mars

special member
Joined: Jan '16
Posts: 373
offline

grahamlthompson - 4 mins ago »

Mars - 10 mins ago »

grahamlthompson - 28 mins ago »

Jthspace - 14 mins ago »

grahamlthompson - 34 mins ago »

Jthspace - 27 mins ago »
Got my sound sorted (well almost). Dived behind the TV and pulled all the cables out of everything and started from scratch. The Humax remote main On/Off (programmed TV button for LG and Inputs) now switches the humax box, tv and panasonic sound box on and the volume level is consistent across all devices EXCEPT that volume up/down on the humax remote still does not change the volume on the Sound box. However, volume levels are consistent across the three devices so no sudden surprise if you switch away from the Humax. As I now also have a Firestick 4K I have retired my Apple TV.
Just loaded Disney+ from the app store and it works fine.
My system preferences show
Model - FVP-4KGTR
Application version -1.00_25_2-1029_0a7a47a
Firmware version - 00.09.09
System ID - A31d9F00
Update date - Oct 29,2020 11:06:43 am

Can you please check the application version that is definetely a 2-1029.
Should be no dash but 21029_ etc
eg Application version: 1.00_25_201029_0a7a47a

Typo on ipad autocorrect. Should read 1.00_25_201029_0a7a47a

Same as mine. Baffled why I haven't got disney+ Wanting to test atmos passthrough.

You must be unlucky as it is the most prominent app when I go to Google Play (Get More Apps)! Have you tried installing from the Google Play Website on a computer: https://play.google.com/store

I already have the app on my Windows 10 laptop. Afaik there is no web browser app for the aura.

You can install apps from the Google Play website on your computer to any compatible Android device including the Aura.

| Fri 13 Nov 2020 14:56:40 #274 |