My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

 

Remote control has stopped working - unit failing to respond.

(371 posts)
  1. User has not uploaded an avatar

    philb

    new member
    Joined: Dec '11
    Posts: 3

    offline

    There is no way the software problem can have broken the remote. Yes you can test it with a camera. I assume you have checked the batteries?

    yes changed them about ten times yesterday lol
    looks like the remote has died at the same time what are the odds of that?

    | Thu 15 Dec 2011 18:16:08 #161 |
  2. User has not uploaded an avatar

    grinningdog

    junior member
    Joined: Dec '11
    Posts: 7

    offline

    I just wanted to say thank you for your excellent advice yesterday about updating my 9150T. Like many others I hadn't updated my software for a year because I leave it on all the time.

    I always assumed I would miss any scheduled recording if the device was on standby, so today I did a little experiment. I set up a recording for the afternoon, put it on standby and went out. When I came back the PVR had faithfully recorded the programme without any problem. I should have guessed it would be cleverer than me!!

    Anyone else with the update/standby issue can be reassured by this I think. Once again, thanks for your help and these excellent forums.

    | Thu 15 Dec 2011 18:30:58 #162 |
  3. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    grinningdog - 6 minutes ago  » 
    I just wanted to say thank you for your excellent advice yesterday about updating my 9150T. Like many others I hadn't updated my software for a year because I leave it on all the time.
    I always assumed I would miss any scheduled recording if the device was on standby, so today I did a little experiment. I set up a recording for the afternoon, put it on standby and went out. When I came back the PVR had faithfully recorded the programme without any problem. I should have guessed it would be cleverer than me!!
    Anyone else with the update/standby issue can be reassured by this I think. Once again, thanks for your help and these excellent forums.

    Low power sby retains the minimum requirements for the box to wake up to record it's schedule (less than 1W). Same for all Humax pvrs satellite or terrestrial.

    It's an eec requirement for all boxes sold since 2009.

    Sky boxes do not comply incidentally but that's a whole new story

    | Thu 15 Dec 2011 18:39:43 #163 |
  4. User has not uploaded an avatar

    bazza

    new member
    Joined: Dec '11
    Posts: 1

    offline

    Hi Barry,

    You are a star - just managed to fix mum's PVR9105T with the help of your posts.

    It kept locking up for no reason.

    It had an old software version from 2009.

    checked for ota update signal as mentioned - it found one available but kept getting 'error E-HW' and locking up. Had to keep switching off at the back and try again!

    Did the reset option 4 thing, but still errored out when trying to auto update.

    Next tried the manual update method ota search and it worked!

    You have saved my mum the price of a new pvr - top man!

    Merry Christmas
    Baz

    | Thu 15 Dec 2011 19:57:30 #164 |
  5. aldaweb

    aldaweb

    administrator
    Joined: Feb '11
    Posts: 400

    offline

    fredoyster - 6 hours ago  » 
    many thanks for all your help. Now back up and working.
    Great - if only they would give it the functionality of the original Tivo !! Mine still works alongside the Humax and is better for some things.
    Still, at least it is all back up and running, thanks to you

    The new Tivos aren't bad either, though you do need a VM cable to get one.

    Just to repost a few links for those who can't or won't read through a long thread.

    DTG OTA download schedule

    Humax digital download page for files and instructions on updating.

    Humax UK Facebook page for news on updates etc.

    you can also follow @humaxdigital on twitter

    | Thu 15 Dec 2011 20:07:26 #165 |
  6. User has not uploaded an avatar

    gnor20

    new member
    Joined: Dec '11
    Posts: 3

    offline

    Thank you for your advice on this Barry , followed your instructions this morning and it worked a treat

    | Thu 15 Dec 2011 21:00:03 #166 |
  7. User has not uploaded an avatar

    philb

    new member
    Joined: Dec '11
    Posts: 3

    offline

    thanks for the help
    i am now up and running again but i have another problem now when i try to play a recorded program it says that this channel is not available or scrambled and there is a purple icon that says exit , after a few seconds this disappears
    you cannot fast forward the message remains on the screen
    any thoughts ?

    | Thu 15 Dec 2011 22:11:28 #167 |
  8. User has not uploaded an avatar

    rim180

    new member
    Joined: Dec '11
    Posts: 3

    offline

    Thanks for the answer to the freezing pvr-9150t box updated software today and seems to be working fine cheers

    | Thu 15 Dec 2011 22:28:18 #168 |
  9. User has not uploaded an avatar

    pg

    new member
    Joined: Dec '11
    Posts: 2

    offline

    davidwms - 1 day ago  » 
    Hi again Barry
    Thanks for your quick reply,i have just been told by another engineer the download is happening from 10 AM tommorrow,is this correct?, i presume all that has to be done is to put the box into stby and wait a while.
    regards
    David

    | Thu 15 Dec 2011 23:11:53 #169 |
  10. User has not uploaded an avatar

    pg

    new member
    Joined: Dec '11
    Posts: 2

    offline

    Brilliant! Thanks to everyone for the information, my freeview box is working again after carrying out a software update. I knew something was dodgy as my parents have the same box and their's went faulty. Just need to tell them to return the new one they bought today.

    | Thu 15 Dec 2011 23:14:25 #170 |

RSS feed for this topic

Reply »

You must log in to post.